The gas stove Koza AB is distinguished by a modern line and innovative technical solutions that provide high thermal efficiency and comfort of operation.
The device has two panes. The outer – with a decorative motif and the so-called glass system – covering the entire surface of the door, providing a modern and very elegant look.
A specially-designed ceramic burner provides a realistic vision of the fire, as in a real wood-fired stove. In addition, it is possible to manually adjust the height of the flame.
SAFETY AT THE HIGHEST LEVEL
The heater is equipped with a fully secure and advanced automatic gas control system using a remote control that prevents uncontrolled fuel leaks.
A hermetically sealed combustion chamber provides the highest degree of safety. In the case of any blockage of the chimney, the furnace can be automatically turned off. This allows you to admire fully-controlled flames.
What is more, the excellent tightness of the stove is ensured by reliable welds made in the noble gas welding technology. The device is made of steel. Steel parts are cut by lasers, using modern machines and then bent on CNC bending machines.
The furnace has its own power supply, which means that it is not dependent on the electrical system. This ensures that even in the event of a power outage, it will operate correctly. The unit is powered with four 1.5V batteries.
The automation in the device ensures that it is protected against unauthorized operation by children. It also allows you to program it to go on or off at a specific time of the day.
What is more, the gas KOZA AB device is equipped with a thermocouple sensor, which, in the event of the flame being extinguished, cuts off the gas supply to the burner.
The stove is EC-certified, guaranteeing safety, health and the environment protection.
Complete control and adjustment of the device is achieved by using a remote control with a built-in thermostat. The installation does not require a traditional chimney – the coaxial cable system allows for the installation of stove in rooms without a chimney, it is enough to take the flue out through a wall or the roof of the building.
The device provides the possibility of programing the daytime temperature, even seven days in advance. This means that we can set the desired temperature and the time of turning it on and off as well.
The light weight and ease of installation allow for changes of location, depending on the access to the exhaust duct. The exhaust outlet is located in the upper plate.
The glass used in the device is special, heat-resistant ceramics, also used in traditional fireplace inserts, it can withstand temperatures up to 800°C.
WARNING! Before purchasing, you should specify which type of gas will be supplied by the system – natural gas or propane-butane, as the choice of the burner and nozzles depends on the choice of gas. Before installation, make sure that the connected equipment is designed to supply gas suitable for the type installed in the gas system. All of the necessary information on the required gas parameters can be found on the fireplace rating plate and in the servicing instructions.
Rated output (kW) ;5,2
Range of heating power (kW) ;2.7 – 5.2
Efficiency (%) ;80,1
Designed for heat recovery unit ;Yes
Fuel type ;natural gas NG
Destination country ;at ch cy cz de dk ee es fi gb gr hr hu ie it lt lu lv no pl pt ro se si sk tr
Weight (kg) ;104,0
The energy efficiency index EEI ;80,09
Glazing type ;quadrant
Width (cm) ;52,80
Height (cm) ;105,10
Depth (cm) ;42,20
Decorative printed glass ;Yes